• Lūdzu nokopē/ielīmē kļūdas ziņu, ko redzi ekrānā, ja tāda ir.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Lūdzu paskaidro, ko Tu vēlējies darīt, ko Tu izdarīji un kas notika

• Kāda ir Tava pārlūkprogramma?

• Lūdzu iekopē tekstu, kas redzams angļu, nevis tavā valodā. Ja Tev ir ekrānuzņēmums, kurā redzama kļūme (laba prakse), vari izmantot Imgur.com , lai to augšupielādētu un kopētu/ielīmētu saiti šeit.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Vai šis teksts ir pieejams tulkošanas sistēmā? Ja jā, vai tas ir ticis tulkots pēdējo 24 stundu laikā?

• Kāda ir Tava pārlūkprogramma?

• Lūdzu, paskaidrojiet savu ieteikumu precīzi un kodolīgi, lai tas būtu pēc iespējas vieglāk saprotams.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Kāda ir Tava pārlūkprogramma?

• Kas tika attēlots ekrānā, kad Tu tiki bloķēts (tukšs ekrāns? Daļa no spēles interfeisa? Ziņa par kļūdu?)?

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Kāda ir Tava pārlūkprogramma?

• Kura noteikumu daļa netika ņemta vērā BGA versijā?

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Vai noteikumu pārkāpums ir redzams spēles atkārtojumā? Ja jā, tad kurā gājienā?

• Kāda ir Tava pārlūkprogramma?

• Kādu spēles darbību Tu vēlējies veikt?

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Ko tu dari, lai panāktu šo spēles darbību?

• Kas notika, kad veicāt šo darbību (kļūdas paziņojums, spēles informācijas paziņojums,...)?

• Kāda ir Tava pārlūkprogramma?

• Kurā spēles solī problēma parādījās (kas bija tā brīža spēles instrukcija)?

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Kas notika, kad mēģinājāt veikt spēles darbību (kļūdas paziņojums, spēles informācijas paziņojums,...)?

• Kāda ir Tava pārlūkprogramma?

• Lūdzu aprakstiet radušos problēmu. Ja Tev ir ekrānuzņēmums, kurā redzama kļūme (laba prakse), vari izmantot Imgur.com , lai to augšupielādētu un kopētu/ielīmētu saiti šeit.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Kāda ir Tava pārlūkprogramma?

• Lūdzu iekopē tekstu, kas redzams angļu, nevis tavā valodā. Ja Tev ir ekrānuzņēmums, kurā redzama kļūme (laba prakse), vari izmantot Imgur.com , lai to augšupielādētu un kopētu/ielīmētu saiti šeit.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Vai šis teksts ir pieejams tulkošanas sistēmā? Ja jā, vai tas ir ticis tulkots pēdējo 24 stundu laikā?

• Kāda ir Tava pārlūkprogramma?

• Lūdzu, paskaidrojiet savu ieteikumu precīzi un kodolīgi, lai tas būtu pēc iespējas vieglāk saprotams.

When you click on a tile to bid on or activate it, a dialog comes up to select the number and colour of the meeples that you mean to use. Its layout visually suggests the physical meeples that you might have behind your screen; but if you "pull a single meeple from the right end of the line", as many of us would do in a physical game, what the interface does is use *all* of your meeples, because rather than corresponding to single physical meeple (as the interface visually suggests), each meeple icon corresponds to a different *number* of meeples.

This is listed as a "suggestion" but really rises to the level of a UI bug---four of the five players in my game last night did this at least once, each time quite sure they'd only grabbed one meeple (and quite upset that this had thus messed up their board position due to wasted meeples). The fifth player said at one point, "yes, I've played this game dozens of times on BGA and I still do that by accident sometimes".

There are many possible fixes. E.g.:

1) If the number selected represents an overbid of more than 1 (e.g. clicking 2 on an empty tile, or 3 on a tile with only 1 meeple so far), request confirmation from the user. It's perfectly valid to overbid and sometimes it's intentional, but it's also not the usual case so it's ok to ask for confirmation.
2) Change the interface to [meeple icon] [1] [2] [3] ... i.e. only have the meeple icon there to show the colour, then click on a square button with a number in it to say how many. This divorces the visual interface from a physical representation so you won't subconsciously "grab the rightmost meeple".
3) Change the interface so that each meeple-with-number shows a stack beneath it with that many meeples in it. Again, divorcing it a little from the physical representation of "row of meeples" and changing it to "how big of a stack of meeples to select".
4) Change the interface to [meeple icon] [pulldown] [OK] so that you can pull down to the number of meeples you want to place---defaulting to 1 if the tile is unselected or the minimum useful number if this is an overbid/reactivation (e.g. default to 3 if there are already 2 meeples on the tile).

Or something else! Many other interfaces would not have the problems that the current one has.

• Kāda ir Tava pārlūkprogramma?